Tuesday 25 October 2016

Wire Nail Machine | Wire Nali Machine In Rajkot-India

Details of Wire Nail Making Machine-06
 

Specifications

Max Wire Diameter S.W.G. (m.m.) 4 s.w.g. ( 6mm)
Max Length  7" (175 mm)
Max Speed (Nails/Minutes) 150
Power Required H.P. 10
Case Size (cms)  245 x 150 x 190

Features

  • This High Speed Wire Nail Machine retained basic design and simple operation for friendly use.
  • Balanced critical parts results low vibration & enhance life.
  • All Lubrication parts are served by centralized automated cyclic lubrication system for long life.
  • A new feeding system permits the use of large wire bundle and maintains close tolerance.
  • Harden ground wedge type die box for longer life and easy low cost refurbishing.
  • Round index able Gripping dies with Eleven Grooves enabling eleven times longer life without any reprocessing

Attributes

  • Easy to operate
  • Low maintenance
  • High performing
  • Long service life

Wire Nail Machine | Wire Nail Machine Manufacturers In India

Details of Wire Nail Making Machine-04
 

Specifications

Max Wire Diameter S.W.G. (m.m.) 2.65mm - 4.06mm, 12g - 6g
Max Length   25mm - 125mm, 1" - 5"
Max Speed (Nails/Minutes) 300
Power Required H.P.  5
Case Size (cms)  160 x 115 x 115

Features

  • This High Speed Wire Nail Making Machine retained basic design and simple operation for friendly use.
  • Balanced critical parts results low vibration & enhance life.
  • All Lubrication parts are served by centralized automated cyclic lubrication system for long life.
  • A new feeding system permits the use of large wire bundle and maintains close tolerance.
  • Harden ground wedge type die box for longer life and easy low cost refurbishing.
  • Round index able Gripping dies with Eleven Grooves enabling eleven times longer life without any reprocessing

Attributes

  • Easy to operate
  • Low maintenance
  • High performing
  • Long service life

Automatic Nail Making Machine | Concrete Nail Making Machine In India

Details of Wire Nail Making Machine-03
 

Specifications

Max Wire Diameter S.W.G. (m.m.) 2mm - 4mm, 12g - 8g
Max Length  25mm - 100mm, 1" - 4"
Max Speed (Nails/Minutes) 400
Power Required H.P. 3
Case Size (cms) 140 x 100 x 115

Features

  • This High Speed Nail Making Machines retained basic design and simple operation for friendly use.
  • Balanced critical parts results low vibration & enhance life.
  • All Lubrication parts are served by centralized automated cyclic lubrication system for long life.
  • A new feeding system permits the use of large wire bundle and maintains close tolerance.
  • Harden ground wedge type die box for longer life and easy low cost refurbishing.
  • Round index able Gripping dies with Eleven Grooves enabling eleven times longer life without any reprocessing

Attributes

  • Easy to operate
  • Low maintenance
  • High performing
  • Long service life

Details of Wire Nail Making Machine- 02 | Wire Nail Making Machine In Rajkot

Details of Wire Nail Making Machine-02
 

Specifications

Max Wire Diameter S.W.G. (m.m.) 2.03mm - 2.65mm, 14g - 12g
Max Length     12mm - 65mm, ½" - 2.5"
Max Speed (Nails/Minutes) 500
Power Required H.P.  2
Case Size (cms) 130 x 100 x 105

Features

  • This High Speed Wire Nail Machine retained basic design and simple operation for friendly use.
  • Balanced critical parts results low vibration & enhance life.
  • All Lubrication parts are served by centralized automated cyclic lubrication system for long life.
  • A new feeding system permits the use of large wire bundle and maintains close tolerance.
  • Harden ground wedge type die box for longer life and easy low cost refurbishing.
  • Round index able Gripping dies with Eleven Grooves enabling eleven times longer life without any reprocessing

Attributes

  • Easy to operate
  • Low maintenance
  • High performing
  • Long service life

Nail Making Machine | Common Nail Making Machine In India

Details of Wire Nail Making Machine-01
 

Specifications

Max Wire Diameter S.W.G. (m.m.) 1.20mm - 2.65mm, 17g - 14g
Max Length 6mm - 45mm, 1" - 1.75"
Max Speed (Nails/Minutes) 600
Power Required H.P.   2
Case Size (cms)     130 x 100 x 105

Features

  • This High Speed Nail Making Machine retained basic design and simple operation for friendly use.
  • Balanced critical parts results low vibration & enhance life.
  • All Lubrication parts are served by centralized automated cyclic lubrication system for long life.
  • A new feeding system permits the use of large wire bundle and maintains close tolerance.
  • Harden ground wedge type die box for longer life and easy low cost refurbishing.
  • Round index able Gripping dies with Eleven Grooves enabling eleven times longer life without any reprocessing

Attributes

  • Easy to operate
  • Low maintenance
  • High performing
  • Long service life

Wire Nail Making Machine-00 | High Speed Wire Nail Making Machine


Specifications

Max Wire Diameter S.W.G. (m.m.) 1mm - 1.4mm, 19g - 17g
Max Length 6mm - 32mm, 0.5" - 1.25"
Max Speed (Nails/Minutes) 700
Power Required H.P.    1.5
Case Size (cms)       90 x 90 x 100   


Features

  • This High Speed Wire Nail Making Machine retained basic design and simple operation for friendly use.
  • Balanced critical parts results low vibration & enhance life.
  • All Lubrication parts are served by centralized automated cyclic lubrication system for long life.
  • A new feeding system permits the use of large wire bundle and maintains close tolerance.
  • Harden ground wedge type die box for longer life and easy low cost refurbishing.
  • Round index able Gripping dies with Eleven Grooves enabling eleven times longer life without any reprocessing

Attributes

  • Easy to operate
  • Low maintenance
  • High performing
  • Long service life

Wire Nail Machine | Nail Making Machine | Nail Machine

Gurukrupa Industries is a leading and widely recognized manufacturer and exporter of Wire Nail Machine, Nail Making Machine, Wire Nail Making Machine, Concrete Nail Making Machine, Wire Nail Making Machine, Nail Machine, Polishing Drum, and Cutting Grinder. The machines are of international grade and give excellent performance. Our machines are exclusive and elite combination of speed and accuracy backed by intensive research of experts. We promise our clients for timely shipment and prompt after sale service for any assistance required by them.



We believe in providing quality to our clients with timely deliveries at the most competitive prices. We have been able to deliver value added solutions to the ever expanding needs of our clients. We ascribe our success to two things: the quality of products that we offer and the regularity with which they are delivered to the customers. Our network is spread all around the world, enabling us to respond to the needs of worldwide market centered around Romania, Yugoslavia, USA, Belgium, UK, UAE, Sri Lanka, South Africa, Kenya, Tanzania, Ghana, Ethiopia, Zimbabwe, Botswana, Mozambique, Nepal and Bangladesh & World Wide

Our Products


The success that we have assumed is indicative of our commitment to the superior quality of products and needs of the customers. We offer a gamut of products which include:
•    Wire Nail Making Machine
•    Wire Nail Machine
•    Nail Making Machine
•    Concrete Nail Making Machine
•    Automatic Wire Nail Making Machine
•    Automatic Wire Nail Machine
•    Nail Manufacture Machine
•    High Speed Wire Nail Machine
•    High Speed Wire Nail Making Machine
•    GI Nail Making Machine
•    Polishing Drum
•    Cutting Grinder
 

Saturday 1 October 2016

Complete Details About Wire Nail Machine, Nail Making Machine, Wire Nail Making Machine

What is Wire Nail Making Machine?
Wire Nail Making Machine Can Produce Different type of Coil Nail in one machine with high Speed and Low Maintenance.

Which type of Raw Material ca used in Nail Making Machine?
Generally you can use ms and coil material to produce wire nail some people are also use galvanized wire or other steel use to manufacturers Nail.


What is Speed of Nail Making Machine?
Well its depend on customer that which type of Nail Making Machine Model Choose it generally Nail Making Machine Speed is 350 Nail Per Minute. It means you can Produce 500 Kg Nail if you’re Nail Making Machine working 8 hour in a day.

Which type of Wire Nail Size Produce in Nail Making Machine?
In this Automatic Wire Nail Making Machine you can manufacture to 6 Inch Nail in One machine

How Much Power Required Starting a Wire Nail Making Machine?
If you want to start to produce wire nail you have required 3 HP Motor to start Production of Wire Nail.

What is Case Size of Nail?
It is 1315 x 1120 x 1130

How Much Weight of Wire Nail Machine?
Wire Nail Machine Weight is 900 KG To 1500 KG As per our Different Model wise

Is it any other Machinery install to start a complete plant wire Nail?
Yes, if you want to start a new plant To Manufacturing a Wire Nail You have first Wire Nail Machine Then Polishing Drum & Cutting grinder and Other Nail Parts Accessories.

Nail Machine | Automatic Nail Machine | Nail Machine Manufacturers In India

This equipment covers one main crank and two side shafts. Due to the special bearing design, it is smoother in operation as compared to the traditional Nail Making Machine. The main axle is directly driven by the motor. In addition, the two side shafts separately used to control the nail cutter part and nail mold part are pulled via four bevel gears.
 
A wire nail having a head and a shank integral with the head, the shank being formed with a tip and having an axis, and the head having a circumferential edge defining a complete circle; characterized in that the centre of the head is radically offset from the axis of the shank.

The wire on the wire wheel will be fed to the working center through the wire roller of the nail making machine, and then the nail head is formed via the stamping of the punch pin after the nail mold clamps the wire tightly. After loosened by the nail mold, the wire will be driven to cutting center through the side shaft. Later, the nail will be cut into the set length. Finally, the finished nails will be automatically ejected through the ejector.

Our New Develop High Speed Low Noise Automatic Nail Making Machine adopts plunger and oil pipe lubricating structure so as to ensure the features such as high speed, low noise and less impact. Especially, it can make the high quality of nails and other special nails with certain accessories. The assortment of our products is complete. We will supply various machine parts and necessary fine auxiliaries for you.

Wire Nail Making Machine | Wire Nail Making Machine Manufacturers In Rajkot-India

This equipment covers one main crank and two side shafts. Due to the special bearing design, it is smoother in operation as compared to the traditional Nail Making Machine. The main axle is directly driven by the motor. In addition, the two side shafts separately used to control the nail cutter part and nail mold part are pulled via four bevel gears.
 
A wire nail having a head and a shank integral with the head, the shank being formed with a tip and having an axis, and the head having a circumferential edge defining a complete circle; characterized in that the centre of the head is radically offset from the axis of the shank.

The wire on the wire wheel will be fed to the working center through the wire roller of the nail making machine, and then the nail head is formed via the stamping of the punch pin after the nail mold clamps the wire tightly. After loosened by the nail mold, the wire will be driven to cutting center through the side shaft. Later, the nail will be cut into the set length. Finally, the finished nails will be automatically ejected through the ejector.

Our New Develop High Speed Low Noise Automatic Nail Making Machine adopts plunger and oil pipe lubricating structure so as to ensure the features such as high speed, low noise and less impact. Especially, it can make the high quality of nails and other special nails with certain accessories. The assortment of our products is complete. We will supply various machine parts and necessary fine auxiliaries for you.

Nail Making Machine | Nail Making Machine Manufacturers In Rajkot-India



This equipment covers one main crank and two side shafts. Due to the special bearing design, it is smoother in operation as compared to the traditional Wire Nail Making Machine. The main axle is directly driven by the motor. In addition, the two side shafts separately used to control the nail cutter part and nail mold part are pulled via four bevel gears.
 
A wire nail having a head and a shank integral with the head, the shank being formed with a tip and having an axis, and the head having a circumferential edge defining a complete circle; characterized in that the centre of the head is radically offset from the axis of the shank.

The wire on the wire wheel will be fed to the working center through the wire roller of the nail making machine, and then the nail head is formed via the stamping of the punch pin after the nail mold clamps the wire tightly. After loosened by the nail mold, the wire will be driven to cutting center through the side shaft. Later, the nail will be cut into the set length. Finally, the finished nails will be automatically ejected through the ejector.

Our New Develop High Speed Low Noise Automatic Nail Making Machine adopts plunger and oil pipe lubricating structure so as to ensure the features such as high speed, low noise and less impact. Especially, it can make the high quality of nails and other special nails with certain accessories. The assortment of our products is complete. We will supply various machine parts and necessary fine auxiliaries for you.

Wire Nail Machine In Rajkot | Wire Nail Machine Manufacturers In India

This equipment covers one main crank and two side shafts. Due to the special bearing design, it is smoother in operation as compared to the traditional Nail Making Machine. The main axle is directly driven by the motor. In addition, the two side shafts separately used to control the nail cutter part and nail mold part are pulled via four bevel gears.
 
A wire nail having a head and a shank integral with the head, the shank being formed with a tip and having an axis, and the head having a circumferential edge defining a complete circle; characterized in that the centre of the head is radically offset from the axis of the shank.

The wire on the wire wheel will be fed to the working center through the wire roller of the nail making machine, and then the nail head is formed via the stamping of the punch pin after the nail mold clamps the wire tightly. After loosened by the nail mold, the wire will be driven to cutting center through the side shaft. Later, the nail will be cut into the set length. Finally, the finished nails will be automatically ejected through the ejector.

Our New Develop High Speed Low Noise Automatic Nail Making Machine adopts plunger and oil pipe lubricating structure so as to ensure the features such as high speed, low noise and less impact. Especially, it can make the high quality of nails and other special nails with certain accessories. The assortment of our products is complete. We will supply various machine parts and necessary fine auxiliaries for you.

Concrete Nail Making Machine | Common Nail Making Machine | High Speed Nail Making Machine

This equipment covers one main crank and two side shafts. Due to the special bearing design, it is smoother in operation as compared to the traditional Nail Making Machine. The main axle is directly driven by the motor. In addition, the two side shafts separately used to control the nail cutter part and nail mold part are pulled via four bevel gears.


Specifications

Max Wire Diameter S.W.G. (m.m.) 2mm - 4mm, 12g - 8g
Max Length  25mm - 100mm, 1" - 4"
Max Speed (Nails/Minutes) 400
Power Required H.P. 3
Case Size (cms) 140 x 100 x 115
 
A wire nail having a head and a shank integral with the head, the shank being formed with a tip and having an axis, and the head having a circumferential edge defining a complete circle; characterized in that the centre of the head is radically offset from the axis of the shank.

The wire on the wire wheel will be fed to the working center through the wire roller of the nail making machine, and then the nail head is formed via the stamping of the punch pin after the nail mold clamps the wire tightly. After loosened by the nail mold, the wire will be driven to cutting center through the side shaft. Later, the nail will be cut into the set length. Finally, the finished nails will be automatically ejected through the ejector.

Our New Develop High Speed Low Noise Automatic Wire Nail Machine adopts plunger and oil pipe lubricating structure so as to ensure the features such as high speed, low noise and less impact. Especially, it can make the high quality of nails and other special nails with certain accessories. The assortment of our products is complete. We will supply various machine parts and necessary fine auxiliaries for you.

Nail Making Machine Process | 1 to 4 Inch Nail Making Machine In India

Nail Making Machine Process
 
This equipment covers one main crank and two side shafts. Due to the special bearing design, it is smoother in operation as compared to the traditional Nail Making Machine. The main axle is directly driven by the motor. In addition, the two side shafts separately used to control the nail cutter part and nail mold part are pulled via four bevel gears.

Specifications
Max Wire Diameter S.W.G. (m.m.) 2.03mm - 2.65mm, 14g - 12g
Max Length     12mm - 65mm, ½" - 2.5"
Max Speed (Nails/Minutes) 500
Power Required H.P.  2
Case Size (cms) 130 x 100 x 105
 
A wire nail having a head and a shank integral with the head, the shank being formed with a tip and having an axis, and the head having a circumferential edge defining a complete circle; characterized in that the centre of the head is radically offset from the axis of the shank.

The wire on the wire wheel will be fed to the working center through the wire roller of the nail making machine, and then the nail head is formed via the stamping of the punch pin after the nail mold clamps the wire tightly. After loosened by the nail mold, the wire will be driven to cutting center through the side shaft. Later, the nail will be cut into the set length. Finally, the finished nails will be automatically ejected through the ejector.

Our New Develop High Speed Low Noise Automatic Nail Making Machine adopts plunger and oil pipe lubricating structure so as to ensure the features such as high speed, low noise and less impact. Especially, it can make the high quality of nails and other special nails with certain accessories. The assortment of our products is complete. We will supply various machine parts and necessary fine auxiliaries for you.

Wire Nail Machine | Automatic Wire Nail Making Machine In India

This equipment covers one main crank and two side shafts. Due to the special bearing design, it is smoother in operation as compared to the traditional Wire Nail Machine. The main axle is directly driven by the motor. In addition, the two side shafts separately used to control the nail cutter part and nail mold part are pulled via four bevel gears.

Specifications

Max Wire Diameter S.W.G. (m.m.) 1.20mm - 2.65mm, 17g - 14g
Max Length 6mm - 45mm, 1" - 1.75"
Max Speed (Nails/Minutes) 600
Power Required H.P.   2
Case Size (cms)     130 x 100 x 105
 
A wire nail having a head and a shank integral with the head, the shank being formed with a tip and having an axis, and the head having a circumferential edge defining a complete circle; characterized in that the centre of the head is radically offset from the axis of the shank.

The wire on the wire wheel will be fed to the working center through the wire roller of the nail making machine, and then the nail head is formed via the stamping of the punch pin after the nail mold clamps the wire tightly. After loosened by the nail mold, the wire will be driven to cutting center through the side shaft. Later, the nail will be cut into the set length. Finally, the finished nails will be automatically ejected through the ejector.

Our New Develop High Speed Low Noise Automatic Nail Making Machine adopts plunger and oil pipe lubricating structure so as to ensure the features such as high speed, low noise and less impact. Especially, it can make the high quality of nails and other special nails with certain accessories. The assortment of our products is complete. We will supply various machine parts and necessary fine auxiliaries for you.

Nail Making Machine Process | Nail Making Machine In Rajkot

This equipment covers one main crank and two side shafts. Due to the special bearing design, it is smoother in operation as compared to the traditional Nail Making Machine. The main axle is directly driven by the motor. In addition, the two side shafts separately used to control the nail cutter part and nail mold part are pulled via four bevel gears.


A wire nail having a head and a shank integral with the head, the shank being formed with a tip and having an axis, and the head having a circumferential edge defining a complete circle; characterized in that the centre of the head is radically offset from the axis of the shank.

The wire on the wire wheel will be fed to the working center through the wire roller of the nail making machine, and then the nail head is formed via the stamping of the punch pin after the nail mold clamps the wire tightly. After loosened by the nail mold, the wire will be driven to cutting center through the side shaft. Later, the nail will be cut into the set length. Finally, the finished nails will be automatically ejected through the ejector.

Our New Develop High Speed Low Noise Automatic Nail Making Machine adopts plunger and oil pipe lubricating structure so as to ensure the features such as high speed, low noise and less impact. Especially, it can make the high quality of nails and other special nails with certain accessories. The assortment of our products is complete. We will supply various machine parts and necessary fine auxiliaries for you.

Wire Nail Machine | Nail Making Machine | Wire Nail Making Machine In India

Gurukrupa industries established in 2012 year and located in Rajkot, Gujarat, India. We are Pioneers in Manufacturers, Suppliers & Exporters of Wire Nail Machine, Nail Making Machine, Wire Nail Making Machine, Nail Machine, Wire Nail Machine Price, Common Nail Making Machine, Concrete Nail Making Machine, Coil Nail Making Plant, Roofing Nail Making Machine, Nail Machine, Wire Drawing Machine, Polishing Drum & Cutting Grinder in Rajkot India as well as all over world with superiority quality. We obtained well trained staff to making Nail Making machine even we are giving best after sales services we have sales supported professional staff. We always believe in qualitative work so customer satisfaction is our main motto.



Nail Making Machine is basically producing common nails, Concrete Nail, Gi Nail, and Coil. Wire nail having a shaft or shank with the head, the shaft being proceed & formed with a tip and the head having defining a circle characterized in that the centre of the head is offset from the imaginary line of the shank. A function of wire nail making machine cuts a coil, steel wire and converts into the nails and make wire nail completely. Wire nail making machines are mainly made from very high quality raw material which ensures high durability at its user ends there various types and different size of coil nail different nail making machine.